May 11, 2016 #1 J jpar1972 Veteran Member Joined Aug 17, 2014 Messages 37 Location USA I just finished switching my heat exchanger, how long should engine run before water comes out of exhaust. I turned engine on but no water is coming out of exhaust
I just finished switching my heat exchanger, how long should engine run before water comes out of exhaust. I turned engine on but no water is coming out of exhaust
May 11, 2016 #2 Capt.Bill11 Guru Joined Apr 13, 2014 Messages 5,438 Location USA It can take 30 sec. to a minute perhaps if the mufgler is dry and empty. Feel the cover plate of your raw water pump with the engine running. If it's cool and doesn't warm up or get hot it's pumping water. Last edited: May 11, 2016
It can take 30 sec. to a minute perhaps if the mufgler is dry and empty. Feel the cover plate of your raw water pump with the engine running. If it's cool and doesn't warm up or get hot it's pumping water.
May 12, 2016 #3 W what_barnacles Guru Joined May 24, 2015 Messages 1,135 Location USA did you re-open the thru hull after working on it?
May 12, 2016 #4 M meridian Guru Joined Aug 21, 2011 Messages 1,014 Location USA Vessel Name Meridian Vessel Make Krogen-42 Could be an air lock. Loosen a hose and see if water is running Sent from my iPhone using Trawler Forum
Could be an air lock. Loosen a hose and see if water is running Sent from my iPhone using Trawler Forum
May 12, 2016 #5 OP OP J jpar1972 Veteran Member Joined Aug 17, 2014 Messages 37 Location USA Thanks meridian, did just that and everything is working.