View Single Post
Old 04-14-2016, 08:31 PM   #60
dhays
Guru
 
dhays's Avatar
 
City: Gig Harbor
Country: United States
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 8,429
Ok. I disconnected the genset battery and disconnected the engine start battery. I then connected the engine start battery to the genset. The genny started up. Before startup, the battery was showing 12.9v with my multimeter. After startup it was showing 13.3v. That says to me that the alternator is working.

Even though the battery terminals looked good, I will reconnect the genset to the genset battery and try it again. If it doesn't run, I will replace the battery tomorrow. It on,y takes an hour to swap the cables given their location. :-(

What am I missing so far?
__________________
Regards,

Dave
SPOT page
dhays is offline   Reply With Quote