Capt.Bill11
Guru
The units are above the water line under the salon satee. The strainer and pumps will be below the water line near the 2" seacock The pumps and ac units are all 3/4" so I need a manifold going from 2" to 2/4.
I found a Vetus manifold that is one inch supply to three 3/4 outlets, I wonder how 1" can supply 3 3/4 outlets if all are needed at same time?
View attachment 50026
No, the manifold is after the pump. So you either mount it directly on the outlet of the pump or down stream of the pump. So it does not need to be 2" inlet to two 3/4" outlets.
To feed two 24,000 btu units I think you'll find you need a pump this size: March Magnetic Drive Pump