tallswede
Senior Member
Well, I have finally got both my heads working! WooHoo! So while I was under the decks running new hoses to the thruhulls, I noticed my fwd. shower sump was full. It has a drain from the shower with what looks like a little plastic box with a bilge pump and float switch. The inlet to the box has what looks like a home made pvc strainer setup to catch hair etc. The fuse holder to the float/pump is bad so an easy fix for that. My aft shower/tub drain looks to have a pex line going straight to a water pump (not bilge pump) with a switch in the shower to turn it on. I don't see a sump/strainer on the pump suction so I'm looking at doing something about that. These do not seem to be very good systems to me. What do ya'll have and how well does it work. Thanks in advance for the input.
Kevin
Kevin