Thread: Vented Loop Use
View Single Post
Old 01-28-2016, 07:26 AM   #16
Tom.B
Guru
 
Tom.B's Avatar
 
City: Cary, NC
Vessel Name: Skinny Dippin'
Vessel Model: Navigator 4200 Classic
Join Date: Jul 2009
Posts: 5,841
I may end up splitting the difference and just mount the pump on a box that gets it at, or slightly above, the waterline in the bilge. Problem solved.

The big roadblock right now is finding a route from the pump location to a suitable output hose connection location. Several bulkheads are in the way and I doubt I will get it as far towards the bow as I would like. So I may end up punching it out of the side of the pilothouse. Still, even to route a 3/4" I.D. hose to there is going to take some doing.
__________________
2000 Navigator 4200 Classic
(NOT a trawler)
Tom.B is offline   Reply With Quote