Work in progress. 65' lugger reworked after a fire
- Thread starter swampu
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
CPseudonym
Moderator Emeritus
Welcome back Paul 
OP
OP
Well I dropped the stacks, stack mounts and davit mounts off to the powder coat shop this afternoon. The holes, I'll take some pictures tomorrow, are glassed up. Luckily I was able to swap out the coating work for some piling work. Great day
OP
OP
I'm using the mobile app so bear with me. We cut panels for the ceiling and have been removing hardware. Took the anchor, windless and chain apart and removed most of the stainless handrail. I also took the supports for the rear deck roof and inserted pressure blocks to make the roof flush. I'll take some more pictures tomorrow of the other work,
CPseudonym
Moderator Emeritus
The Rose is gonna rise again
Tony B
Guru
- Joined
- Jul 18, 2011
- Messages
- 1,251
- Location
- Cruising/Live-Aboard USA
- Vessel Name
- Serenity
- Vessel Make
- Mainship 36 Dual Cabin -1986
Hi Paul
Glad to see that you are moving forward on Cajun Rose.
She is a beauty
I assume your piling business is doing well
We will always remember Mardi Gras.
Regards
Tony B & Helen
Glad to see that you are moving forward on Cajun Rose.
She is a beauty
I assume your piling business is doing well
We will always remember Mardi Gras.
Regards
Tony B & Helen
CPseudonym
Moderator Emeritus
The Rose is going to look amazing all spruced up and cruising the Gulf again.
- Joined
- Apr 15, 2008
- Messages
- 13,731
- Location
- California Delta
- Vessel Name
- FlyWright
- Vessel Make
- 1977 Marshall Californian 34 LRC
Jupiter? That sh1t must be expensive!
Pack Mule
TF Site Team
- Joined
- Jan 24, 2013
- Messages
- 3,749
- Location
- USA
- Vessel Name
- Slo-Poke
- Vessel Make
- Jorgensen custom 44
Dang it I meant Juniper .
I forgot to measure twice and cut once . This crap happens every time I get all confident and think I know what I'm talking about . And I'm a lumber guy
Anyway nice work Paul . The Rose is shaping up to be one sweet Lugger .
Last edited:
OP
OP
Sailor of Fortune
Guru
Nice work Swampu! Progress is what we like. Your were marked absent for a while (and we noticed)
RT Firefly
Enigma
Greetings,
Mr. S. That second last shot (bow) does it for me. What an impressive vessel. I've never seen her from that angle.
Mr. S. That second last shot (bow) does it for me. What an impressive vessel. I've never seen her from that angle.
- Joined
- Apr 15, 2008
- Messages
- 13,731
- Location
- California Delta
- Vessel Name
- FlyWright
- Vessel Make
- 1977 Marshall Californian 34 LRC
Really nice work, Swampu! You've made amazing progress.
Great lines....a true riverboat!
Great lines....a true riverboat!
healhustler
Guru
- Joined
- Oct 2, 2009
- Messages
- 5,198
- Location
- USA
- Vessel Name
- Bucky
- Vessel Make
- Krogen Manatee 36 North Sea
Come-on, Marty.....you're a woodworker and could make Wm into a mini-Swampu any time you wanted! Get on with the extended roof project.....probably less work than the cockpit hardtop was.
