View Single Post
Old 01-11-2016, 01:17 PM   #7
jleonard's Avatar
Join Date: Jun 2008
Posts: 3,528
When I worked at a company that made solenoid valves, failed coils due to moisture wicking thru wire leads was often a problem in field failures.
Even epoxy potting/sealing could be subjected to wicking depending on conditions. A hot engine compartment contributed at times.
So did corrosive liquids like pesticides, and I would put salt water in that group.
Jay Leonard
Attitude Adjustment
40 Albin
Mystic,Ct. /New Port Richey,Fl
jleonard is offline   Reply With Quote