View Single Post
Old 10-06-2015, 06:53 AM   #12
O C Diver
O C Diver's Avatar
City: Fort Myers, FL... Summers in Crisfield, MD
Country: USA
Vessel Name: Slow Hand
Vessel Model: Cherubini Independence 45
Join Date: Dec 2010
Posts: 7,700
My boat has two tanks. It's now set up where the engine and generator both draw from the starboard tank. Fuel can be added to either tank, but in practice will only be added to the port tank. My fuel polisher will polish either tank or transfer fuel in either direction. So all fuel will be added to the port tank and polished going to the starboard tank. Fuel transfer will also be used to trim the boat. The tank drains (pump connection point) are located in the bottom forward corner (lowest point). Likely I will develop a routine for a brief polishing of the starboard tank to remove any accumulation in that lowest point.

I'm tired of fast moves, I've got a slow groove, on my mind.....
I want to spend some time, Not come and go in a heated rush.....
"Slow Hand" by The Pointer Sisters
O C Diver is offline   Reply With Quote