View Single Post
Old 08-07-2015, 03:52 PM   #7
Keysdisease
Guru
 
Keysdisease's Avatar
 
City: South Florida
Join Date: Sep 2014
Posts: 1,088
It would be very unusual for you to have oil in the reservoir and for the tabs to move but not go full travel. If the work they work, if they don't there's a reason.

If you can get them both all the way down and then measure or visualize them and then check the next day that will tell you if you have a leak. If they creep back up overnight there is a leak, either internally back into the reservoir, somewhere in the plumbing into the bilge, or the seals on the actuator.

Keysdisease is offline   Reply With Quote