Quote:
Originally Posted by O C Diver
Filled the steps in on my hull during the refit. Pictures aren't very good and the fairing compound color makes it appear poorly faired, but it's absolutely smooth and slick. The void was filled with Coosa board, then glassed over with 3 layers of biaxial cloth, and then faired and gel coated smooth. If the next owner wanted to remove it, it woold be a simple matter of grinding the glass off and redoing the gel coat as none of the hull glass was disturbed and there were no screws used.
Attachment 42532
Attachment 42533
Attachment 42534
Attachment 42535
Attachment 42537
Ted
|
??
Sent from my iPhone using Trawler Forum