Deck Window Hatch rough opening
- Thread starter Eeber
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
RT Firefly
Enigma
Greetings,
Mr. E. Sounds like it definitely will fit in the opening but the deciding factor will be how much the mounting flange on the new port overlaps the old opening. I'm sure there must be a minimum distance one doesn't want to exceed.
Mr. E. Sounds like it definitely will fit in the opening but the deciding factor will be how much the mounting flange on the new port overlaps the old opening. I'm sure there must be a minimum distance one doesn't want to exceed.
FF
Guru
- Joined
- Oct 12, 2007
- Messages
- 22,552
Will the fastnings of the new hatch see deck or air?
If its deck you are fine , use a sealant , like Dolphinite , not a glue like 5200.
IF the hatch is fairly new it may be built to use tape , the fastest , simplest method.
If its deck you are fine , use a sealant , like Dolphinite , not a glue like 5200.
IF the hatch is fairly new it may be built to use tape , the fastest , simplest method.
