Quote:
Originally Posted by janice142
Exactly Steve. And I have never seen another. Instead of a wide throat, it's deep. And yes, as a matter of fact I could use one right now. '
Mostly though, I use my multimeter, a Philips and standard screw driver, plus the vise grips. When I'm on an install kick the wire strippers are used. Ditto reamer -- just used that when replacing the switch on a light in my cabin. The new switch was a smidgen larger than the old one, so a few twists of the reamer and voila: it fit.
And now I have light.
|
Try a welding shop or welding supply store.
we had both the deep screw type and vice grip type on the welding table where I used to work.