OneofSix
Veteran Member
Good afternoon,
Tecma Toilet gurgles. Recent unsolved problem.
Back info - there are 2 Tecma toilets connected to an Electroscan unit. There is a Y valve that goes to the holding tank. One toilet is working ok. The other is not working at all...again.
1- When the toilet is connected to holding tank, the toilet flushes no problem. Both toilets work the same. Whoosh and the water flushes to the holding tank. That tells us the macerators are working. The toilets are working to the best of our knowledge.
2- When the Y valve is turned to the electroscan, one toilet flushes ok. The other toilet does NOT flush. Water collects in the head and gurgles. Bubbles can be seen. It is as if the toilet has lost its prime. The macerator turns on but does not pump the water out.
What's going on? Anyone have an idea? Time to call Tecma or Electroscan folks? Please advise.
Thanks
Tecma Toilet gurgles. Recent unsolved problem.
Back info - there are 2 Tecma toilets connected to an Electroscan unit. There is a Y valve that goes to the holding tank. One toilet is working ok. The other is not working at all...again.
1- When the toilet is connected to holding tank, the toilet flushes no problem. Both toilets work the same. Whoosh and the water flushes to the holding tank. That tells us the macerators are working. The toilets are working to the best of our knowledge.
2- When the Y valve is turned to the electroscan, one toilet flushes ok. The other toilet does NOT flush. Water collects in the head and gurgles. Bubbles can be seen. It is as if the toilet has lost its prime. The macerator turns on but does not pump the water out.
What's going on? Anyone have an idea? Time to call Tecma or Electroscan folks? Please advise.
Thanks
Last edited: