View Single Post
Old 02-14-2015, 08:56 PM   #13
psneeld
Guru
 
psneeld's Avatar
 
City: ACIW
Country: USA
Vessel Name: Freedom
Vessel Model: Albin 40
Join Date: Oct 2011
Posts: 19,104
My Taiwan boat sitting in a Florida canal developed hydrolysis to the point where I had to grind out a 6 by 6 foot by 1/2 inch deep section out because of severe delamination...almost 1/2 way through the hull.

Not all of the were bulletproof...and thick glass is only as good as the materials and layup.....

My research shows that all in all...my situation was rare...but not the only one with issues.
psneeld is offline   Reply With Quote