Quote:
Originally Posted by Captain Ralph
On your earlier post, you quoted an AC20 software part number, A kit part number and an AP25 software part number. I'm assuming the software is just new e-proms. What was the kit? The removal tool?
AND, did the AC20 need upgrading to work with the WR20?
Thx.
,rc
|
I didn't perform an update to the AP25, only the AP21. I looked up the part numbers in a Simrad master parts catalog. If you will refer to Page 136 and 137 of the
AP25 User's Manual, you will find a brief description of the update, but the detailed instructions are included in the programming kit. It is used in conjunction with a PC to download the software to the Control Unit via the download connector.
As I mentioned in that post, "I am not familiar with that upgrade process so you will have to rely upon guidance from Simrad tech support or other members for that."
As for the WR20 question, you might try John Filippelli at JFI Marine Electronics as was mentioned in Spottsville's post
#7
Sorry, but that's about all I know about it.
Larry
M/V Boomarang