FF
Guru
- Joined
- Oct 12, 2007
- Messages
- 22,552
One one boat we simply ran the bilge pump discharge into the above the WL self draining sink.
A square of bilge absorb on the drain caught the oil, the oil partially dissolved with soap and other gunk.
Easy to monitor as you use a scrub brush to brake the gunk loose and flush it.
If the gunk has sunk and is stuck to the hull, only scrubbing will get ir loose/
A square of bilge absorb on the drain caught the oil, the oil partially dissolved with soap and other gunk.
Easy to monitor as you use a scrub brush to brake the gunk loose and flush it.
If the gunk has sunk and is stuck to the hull, only scrubbing will get ir loose/