bshillam
Guru
- Joined
- May 18, 2013
- Messages
- 801
- Location
- USA
- Vessel Name
- Our Heaven
- Vessel Make
- 1997 4800 Navigator
So last week I go to turn on the stove to my newly acquired Willard and the darn thing doesn't turn on. I check, 12 volt turned on, propane tank opened 100 psi showing on the valve body (pre solenoid) sniffer on, with panel switch showing green....Still nothing. So I double check, add 1.4 gallons of propane and re attach tank to system. Now showing 110 psi at the gauge pre solenoid. Nothing at the stove.
Now, how many have had solenoids go bad? Have you taken them apart, cleaned and put back together to have working again? What do you clean the parts with? I am assuming that this really is the only thing it could be as the sniffer is showing red (on) and the panel is lit green. The only moving part in the whole system is that darn solenoid. When I switched my last system on you could hear the solenoid turn on (open) this one not so.
Thanks for the help.
Now, how many have had solenoids go bad? Have you taken them apart, cleaned and put back together to have working again? What do you clean the parts with? I am assuming that this really is the only thing it could be as the sniffer is showing red (on) and the panel is lit green. The only moving part in the whole system is that darn solenoid. When I switched my last system on you could hear the solenoid turn on (open) this one not so.
Thanks for the help.