BruceK
Moderator Emeritus
- Joined
- Oct 31, 2011
- Messages
- 13,347
- Vessel Name
- Sojourn
- Vessel Make
- Integrity 386
Volvo Shaft Seal (Drift)
Conventional shaft seals are likely to drip. Most bilges get some watering. It`s when the water intrusion changes you need to start sleuthing.
A while back I started a thread for info/experience about Volvo shaft seals, with zero response. This seems as good a place as any to ask again. My limited research suggests they are more trouble free than PSS but need the shaft in A1 condition.
Conventional shaft seals are likely to drip. Most bilges get some watering. It`s when the water intrusion changes you need to start sleuthing.
A while back I started a thread for info/experience about Volvo shaft seals, with zero response. This seems as good a place as any to ask again. My limited research suggests they are more trouble free than PSS but need the shaft in A1 condition.