Dixie Life
Senior Member
Well I've put it off as long as I can; it's time to replace the bad wood and mounts on the engine. I'm gonna tackle the job myself; afraid to even ask what a yard would charge. So, all advice will be greatly appreciated.
The plan is to use a chain hoist to lift the engine just enough to remove/replace the wood and install new mounts. Not sure yet what size/type of beam to hang the hoist on. So if any of you have done this on your own (probably a dozen of you guys) gave me some direction. Thanks
The plan is to use a chain hoist to lift the engine just enough to remove/replace the wood and install new mounts. Not sure yet what size/type of beam to hang the hoist on. So if any of you have done this on your own (probably a dozen of you guys) gave me some direction. Thanks