CPseudonym
Moderator Emeritus
Looks fantastic!! A lot of hard work that appears to have paid off 
Flying Bridge disassembly- experience anyone?
- Thread starter Tangler
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
TONTOROSS
Senior Member
Tangler I had no idea that the leak frm the band of teak on the eyebrow would cause so much damage. I'm in Montana now - should back on the boat in a couple weeks. I'll remove the band & see how much damage there is. As you have found, I'm sure I'll be opening Pandora's Box. It makes no sense to me to step over a dollar to pick up a dime so I'll start there. Thanks for knowledge. I'll keep touch. Tonto
BruceK
Moderator Emeritus
- Joined
- Oct 31, 2011
- Messages
- 13,347
- Vessel Name
- Sojourn
- Vessel Make
- Integrity 386
Tangler, I remember you investigating this a long time ago, sorry it turned out so big a job, but what a great repair and improvement.
Tonto, hope it goes well. If you uncover soggy stuff, which was once wood and now looks like wet breakfast cereal, you`ve got problems. A small opening letting in water under wind pressure = trouble.
Tonto, hope it goes well. If you uncover soggy stuff, which was once wood and now looks like wet breakfast cereal, you`ve got problems. A small opening letting in water under wind pressure = trouble.
HopCar
Guru
- Joined
- Aug 20, 2011
- Messages
- 5,311
- Vessel Name
- Possum
- Vessel Make
- Ellis 28
Very impressive job! Well done.
Victoriana
Member
- Joined
- Mar 10, 2014
- Messages
- 24
- Location
- canada
- Vessel Name
- Victoriana
- Vessel Make
- Universal 36' Tri-Cabin
Just curious to know how thick the first layer of fibreglass was (the layer that the teak decking would sit on)
