View Single Post
Old 08-16-2014, 08:44 AM   #3
psneeld
Guru
 
psneeld's Avatar
 
City: AICW
Country: USA
Vessel Name: Freedom
Vessel Model: Albin 40
Join Date: Oct 2011
Posts: 20,143
Quote:
Originally Posted by Ski in NC View Post
Rotate the band and sensor a bit. The top of the hose often gets hot at low power due to the water mostly being at the bottom of the hose. Not enough water/exhaust velocity to get things to mix very well. A common issue on this type of exhaust. As long as hose does not get hot enough to degrade, it should be ok. At high power, everything should mix fine and hot spot diminish.


could also pull the hose and check the mixing hole(s), whole mixer for issues/debris.

Some elbows have a large opening...some tiny holes...not sure of yours.
psneeld is online now   Reply With Quote