View Single Post
Old 08-15-2014, 05:56 PM   #5
Capt.Bill11
Guru
 
Capt.Bill11's Avatar
 
City: Sarasota/Ft. Lauderdale
Country: USA
Join Date: Apr 2014
Posts: 5,439
Scrub the strainer clean with degreaser than soak the strainer in any mild acid solution. The only way to keep it from turning green again, which is not a bad thing, is to either clean coat it or paint it. They look pretty sharp painted white.

As to the wire reinforced hose, a heat gun will do little or nothing as it does nothing to the wire. The quickest way to cut through wire reinforced hose is with a Dremel tool with a cut off disk attached to it. Cuts through the hose and wire like butter. Pop, pop, pop goes the wire and off comes the hose.
Capt.Bill11 is offline   Reply With Quote