Quote:
Originally Posted by hobbystuff
Ok gents, thanks for all the advice. I was down at the boat tonight and changed all of my filters, just to see what I had going - first time since we bought the boat.
I was wrong about the routing.... from the tanks:
The Racor is first in line, and has a 2 micron filter.
T's off to the generator after the Racor (Genny has its own filter as well).
Then through the FRAM which I am told is 5 microns nominal
Finally to the on engine dual CAV units which are 10 microns
-- Ryan
|
Our very similar universal has the identical filter setup, for some reason I don't think the racors were add ons, may be original. The PO never used a filter in the fram unit, the actual filter not the whole unit cost much more than the racors ones.