View Single Post
Old 07-14-2014, 06:33 AM   #21
jleonard
Guru
 
jleonard's Avatar
 
Join Date: Jun 2008
Posts: 2,936
I had a "pesky" coolant leak around the filler cap for a couple of years. Not much would leak, but there was always anti-freeze in the groove around the top of the expansion (aka Header) tank.
I finally fixed the problem. The extended neck is epoxied in place when the mod is done. That epoxy had developed a small crack.
I ground it out a little with a dremel, cleaned it and gooped it up with some epoxy and the leak is fixed.
__________________
Jay Leonard
Attitude Adjustment
40 Albin
Mystic,Ct. /New Port Richey,Fl
jleonard is offline   Reply With Quote