psneeld
Guru
Some of you enjoyed the pics of me ripping the bottom off my boat...thought you would like to see me ripping the interior out by hand.
The PO obviously let the former OEM windows leak forever...then had some hack cover every square inch of the interior with some stain to cover the water stains.
The good news is..it seems like a 4 layer, thin teak ply was glued to a slightly thicker ply or it was just teak ply that had a REALLY thick coat of glue part way though.
I say that is because 4 layers were rotten and could be stripped by hand..but after that..the ply seems solid out to the fiberglass exterior.
I'm stripping and using T&G pine paneling stained with min-wax white pickling....seem most peoples favorite of all the things I showed them.
The PO obviously let the former OEM windows leak forever...then had some hack cover every square inch of the interior with some stain to cover the water stains.
The good news is..it seems like a 4 layer, thin teak ply was glued to a slightly thicker ply or it was just teak ply that had a REALLY thick coat of glue part way though.
I say that is because 4 layers were rotten and could be stripped by hand..but after that..the ply seems solid out to the fiberglass exterior.
I'm stripping and using T&G pine paneling stained with min-wax white pickling....seem most peoples favorite of all the things I showed them.