Quote:
Woodsong wrote:
What size anchor are most of you all running on your trawlers (in the 36' range)?
|
Weight is not the only consideration.* Design plays a major role, too.* For example a Fortress anchor sized for your boat may only weigh 20 pounds, or maybe even less, but if used in the bottoms that its most suited for, it will hold better than other anchors two or even three times as heavy.
We use a 44# Rocna on our GB36.* We used to have a 33# Bruce, which is the most common size Bruce*used on this particular boat in this area (PNW).* While I no longer think a Bruce is a viable anchor design, if someone was bound and determined to use one on their 36' trawler I would recommend AT LEAST 44# and probably even heavier if their pulpit, windlass, etc. can accomodate it.
*