shipshape
Senior Member
- Joined
- May 23, 2010
- Messages
- 117
- Location
- Australia
- Vessel Name
- Eliza 1
- Vessel Make
- Halvorsen 42 Pilothouse
Dear experts ....My clipper from 1977 has the original parquet internal floor ... I remove the carpet .... found the floor being stained and stained , then varnished and varnished ..... and one more coat of varnish over the years ..... I now sanded it back with 40, than 60 , 100 and now 240 sandpaper .... now back to timber ...... we would like to keep the timber look.
Big question *now ... what do I use .... a coat of varnish or oil ?
Varnish I guess will be slippery ? *Oil will make marks when wet? *What is easier? and what is better?
Wouldn't mind some thoughts from the forum ....
Thanks.
Erik
Big question *now ... what do I use .... a coat of varnish or oil ?
Varnish I guess will be slippery ? *Oil will make marks when wet? *What is easier? and what is better?
Wouldn't mind some thoughts from the forum ....
Thanks.
Erik