Thread: Splicing Wires
View Single Post
Old 03-22-2014, 09:29 AM   #39
kevmiami
Newbie
 
City: West Palm Beach
Join Date: Nov 2013
Posts: 1
I used to routinely splice 12v bilge pump wires with anchor adhesive butt connectors. They were often submerged & always damp - never had a single failure. Trick is to use good crimper, pull firmly to test (good crimp is actually fusing wires physically) and slowly rotate crimp while you heat; making sure you visually see adhesive seep out fully around wire. Never fails :^)
kevmiami is offline   Reply With Quote