healhustler
Guru
- Joined
- Oct 2, 2009
- Messages
- 5,198
- Location
- USA
- Vessel Name
- Bucky
- Vessel Make
- Krogen Manatee 36 North Sea
I'm in the final stages of completing a genset re-location from the machinery space below the galley to a new hatch in the veranda. In doing the swap, I will be moving both the main engine and genset exhaust through the port side transom. I thought I'd do two different holes, but then heard of someone who routed the genset exhaust into the main engine exhaust just before the transom exit. Both are water mufflers. Has anyone done this that can comment? Thanks in advance.