Thread: IG shaft zincs
View Single Post
Old 12-21-2013, 01:44 PM   #28
psneeld
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,149
Mine cut like butter with the 4" grinder and cutting wheels...lots'o sparks so being vigilant is important....

PLEASE don't put a solid coupler back on...that's why you are where you are now! make it easier for the next time whether you or the next guy.

Either way the shaft has to be trued and the coupler mated at right angles...if you can do that great..but take her to a machine shop if you can't.

2 years ago I had a shop purchase and true my shaft and coupler...plus flame spray some pitting where my stuffing covered the shaft.
psneeld is online now   Reply With Quote