View Single Post
Old 05-29-2013, 05:27 AM   #109
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
"3480-3780 RPM gen operating speed" seems a tad higher than I operate my engine at.

Thats why the preferred engine RPM is matched to the gen head with a set of belts .

No problem sizing a belt/pulley setup for a 1200 or 1800 RPM engine .

Since the Gen set was working , just the engine died , the local truck reefer shop will have fine running takeouts for $300-$500 .

These are uaually Kubota or Yannmar and will have huge oil pans to operate un inspected for 10 days.
FF is offline   Reply With Quote