40" x 3" Watermaker Membrane supplier

lelievre12 · May 16, 2013

Dear group,

I am after a supplier of a new membrane for my HRO watermaker.

It is 40" x 3" so DOW wont work. Any ideas welcome.

Tomas · May 16, 2013

My HRO 500 used a 2540 (2.5"X40") membrane. What model HRO do you have?

lelievre12 · May 16, 2013

Tomas said:
My HRO 500 used a 2540 (2.5"X40") membrane. What model HRO do you have?

It's a Seafari Compact with a Size C 40" x 3" membrane. Hard to get.

I'm thinking of changing over to a 21" x 4" housing which is widely available and about the same GPD.

windmist · May 16, 2013

Check out FILMTEC MEMBRANE. Give them a call with your requirements and I'm sure you will find what you need. Very seldom do you need to go back to the maker of your watermaker to get replacement membranes.

Ron

Tomas · May 17, 2013

I used a company in Long Beach, GET Inc. Try calling them at Tel: 1-562-983-7777. When I worked with them they were, I think, much smaller than today and were very helpful. If they don't have the 3x40, they may be able to point you in the right direction.

Chrisjs · May 18, 2013

You may well find that it is most cost effective to switch to a standard 40 x 2.5 membrane even if you need to buy a new pressure vessel. I made this decision a couple of years ago rather than buy non-standard size membranes for my Village Marine RO. The standard membrane plus housing cost less than a new non-standard membrane. Plus you only need to buy the housing once!

40" x 3" Watermaker Membrane supplier

lelievre12

Veteran Member

Tomas

Senior Member

lelievre12

Veteran Member

windmist

Guru

Tomas

Senior Member

Chrisjs

Guru

Similar threads

Latest posts