Thread: M/T Hatch cover
View Single Post
Old 08-04-2009, 01:24 PM   #8
ARoss
Guru
 
ARoss's Avatar
 
City: Chocowinity NC
Vessel Name: My Yuki
Vessel Model: 1973 Marine Trader 34
Join Date: Nov 2007
Posts: 634
RE: M/T Hatch cover

Thanks for the input.* I wound up using 3/8" exterior plywood, glassed with 3 coats of West System epoxy.* Slats were ripped from a piece of 6/4 x 6 teak into 2" x 1/4" pieces.* I pegged and screwed the outside pieces, but the rest are just floating in black caulk.*

Still need to finish with Cetol, but will wait a while until the surface of the new teak dries out a little.


I have thought about a handle too, but it might not fit under the sunbrella cover.* We'll see.


hopefully this will last me a few years.* ...
Attached Thumbnails
Click image for larger version

Name:	hatch 006.jpg
Views:	58
Size:	164.0 KB
ID:	1367  
ARoss is online now   Reply With Quote