ancora
Guru
- Joined
- Dec 16, 2007
- Messages
- 4,022
My Garmin 176C chartplotter no longer displays tides. I changed the monitoring station but still nothing. No response from Garmin product support.
Chartplotter Problem
- Thread starter ancora
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Codger2
Guru
- Joined
- Oct 11, 2007
- Messages
- 6,691
- Location
- US
- Vessel Name
- Circuit Breaker
- Vessel Make
- 2021..22' Duffy Cuddy cabin
Ralph: Although I'm not familiar with your Garmin, make sure all other modes of your chart plotter are working, then check to see if your plotter "clock" is set to the right time. (Daylight saving time) If it still doesn't work, call Ed at Phantom Marine and I'll bet he can tell you what's wrong over the phone.
troy994719
Senior Member
- Joined
- Oct 2, 2007
- Messages
- 278
You might try updating the firmware on the unit, Garmin has software that makes it easy. If you have a laptop without a serial port you can pick up a USB to serial converter for less than $20
http://www8.garmin.com/products/webupdater/howtoinstall.jsp
-- Edited by troy994719 on Wednesday 20th of May 2009 11:09:33 AM
-- Edited by troy994719 on Wednesday 20th of May 2009 11:10:33 AM
http://www8.garmin.com/products/webupdater/howtoinstall.jsp
-- Edited by troy994719 on Wednesday 20th of May 2009 11:09:33 AM
-- Edited by troy994719 on Wednesday 20th of May 2009 11:10:33 AM
Similar threads
