View Single Post
Old 03-03-2013, 09:42 AM   #4
Vyndance
Senior Member
 
Vyndance's Avatar
 
City: Ventura, CA
Country: USA
Vessel Name: Vyndance
Vessel Model: 48 Californian CP
Join Date: Aug 2010
Posts: 154
I would suggest running the autopilot on its' own breaker. It draws quite a bit when the pump is running. The data wires can connect through a newmar type or eurostrip connector.. PVC boxes and glands are available from McMaster Carr or Imtra. Imtra is labeled marine and cost 4 times as much. If you are wiring in a protected space the boxes are not really necessary but make the job very sanitary. I would cover the ends of the stripped wire with dielectric grease.
Vyndance is offline   Reply With Quote