View Single Post
Old 10-27-2008, 06:36 PM   #4
Forkliftt
Guru
 
Forkliftt's Avatar
 
City: Biloxi Mississippi
Country: USA
Vessel Name: Patricia Louise II
Vessel Model: 1983 42' Present Sundeck
Join Date: Oct 2007
Posts: 2,442
RE: Replacing exhaust hose

Chris,
You might want to get what I call a "Sneaky Pete" (cotter pin tool). It resembles a long awl, bent to 90 degrees on the end. You can slip the point under the hose and pull it around to dislodge the hose. Recently I changed a long section of black water hose and cut it into sections with my SawzAll with a fine tooth blade.This made for much easier diposal and also helped to get the ends loose. If you used this method you would probably need a 6" blade for the larger diameter hose.
Steve
Forkliftt is offline   Reply With Quote