Quote:
Originally Posted by Larry M
We have used this: It's a y adapter with two-30 amp female to one-30 amp male. It feeds from one 30 amp shore power cord to the 2-30 amp circuits at the boat. It allows us to use both 30 amp circuits and to run 1 of the AC units if we shut off the hot-water heater and are careful not exceed 30 amps total for the boat. If we do, there is over-current protection at the pedestal (assuming that's wired correctly).
|
I think this is what I was looking for. Wonder why those things are so doggoned expensive? (Answer:
Everything for a boat is expensive! :-)