Lubing Stuffing Box / shaft seals?

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

rclarke246

Senior Member
Joined
Mar 17, 2014
Messages
450
Location
USA
Vessel Name
Lady Di
Vessel Make
2012 Beneteau Swift Trawler 44
I have read about adding some grease to the rubbers seals where the drive shafts exit the stern.

Has anyone actually done this on their Swift?

All I've ever done is to try and burp the air out (by squeezing) after periods of non-use. After 6 years still no trouble.

I don't want to mess up a good thing which is why I'm asking about greasing them.
 
I have read about adding some grease to the rubbers seals where the drive shafts exit the stern.

Has anyone actually done this on their Swift?

All I've ever done is to try and burp the air out (by squeezing) after periods of non-use. After 6 years still no trouble.

I don't want to mess up a good thing which is why I'm asking about greasing them.

So funny you asked I just figured it out (at least I think I did)

Apparently you need to burp every time the boat is hauled and re-launched

Should grease 1-2x per season

Here is a thread I found: Service Volvo Dripless Shaft Seal - Stuffing Box - Cruisers & Sailing Forums

What I did was obtain Volvo part # 828250 for a small tube of grease, cost was $7-8 off amazon or ebay

I followed what other people are doing, squirted into a plastic straw, inserted the straw in, squeezed grease in as I slowly retracted the straw

I don't know if I did it right or put the straw far enough in yet because the boat is on the hard, I plan to do a little bit more

The dealer wanted $400 to do what took me two minutes...and $8...

I was worried I hadnt greased in the past year but you are making me feel less worried if you haven't greased in so many years!
 
I just asked my mechanic about this.
He said that because they are fully water-lubed he would not mess with them. He has never heard of adding grease.

I must say, 7 years in with no added lube and no problems.
Knocking on wood.
 
Lubing stuffing box

I use Volvo shaft seal grease and apply it with a small syringe.
 
Back
Top Bottom