mondofromredondo
Member
Anyone know if doing a valve adjustment on a TAMD 63 involves the standard adjustment screw to set clearances? Someone had told me I may need to use shims to adjust the clearance which sounds like a PIA. Also does anyone know if the TAMD63 is also one of the Volvos that has a restrictor in the hose on the coolant exhaust side of the turbo. I've read that some of the TAMD's have a restrictor to slow the coolant flow and that it sometimes gets clogged up. As I just bought a Californian with 2 of these babies any info I can find (especially first hand) would be appreciated.
These are 2001 versions of the motor with 600 hours on them so I'm thinking I've got some much needed PM to do on them so cooling, valves and a good cleaning of the fuel system seems in order before I can kick back, have a beer and just go somewhere.
Thanks to all !!!
Keith
These are 2001 versions of the motor with 600 hours on them so I'm thinking I've got some much needed PM to do on them so cooling, valves and a good cleaning of the fuel system seems in order before I can kick back, have a beer and just go somewhere.
Thanks to all !!!
Keith