twin drive belts

[supertramp]

I*need for my air - compressor ( stabilizer ) two belts- but as twin-type; not dobble belts.
Any idea in which place i can find it ?

With greeting- Norbert

 

[Steve]

Do you have the part number of the belt? It is usually written on the belt outside part.
Steve

 

[Phil Fill]

Try Grainger Industrial and/or International Belt and rubber.*

 

[supertramp]

Steve -i have foundet:
A 51 K Pat. No. 340 45 77 Made in USA; OBBD

Norbert

 

[FF]

You would be amazed at what NAPA can get , in a day or two.

FF

 

[Steve]

I found a belt part number A-51K (the Patent number is not important) listed on several tractor parts companies shown below; it may be the same belt, you need check the size to be sure.

Tractor Supply Company
Huskee Vee belt
Manufacturers Number: A51K
V-Belt; 1/2 x 53 in Size; Rubber Material; Blue Color

Tracparts
Kevlar Blue V-Belt (1/2 X 53" )"
Item #: A-A51K Quantity in package = 1 o.c. length: 1/2 X 53"
top width: 1/2" depth: 5/16"
$11.06
If you have a contact in the US surely a NAPA store can get it for you also.

As it is a tractor part also you may find it at a tractor dealer in Venezuela, John Deere, Case, Massey Ferguson The important thing is the size, 1/2 inch wide, 53" outer circumference, 5/16 inch deep, be sure these sizes are the same on your old belt.
Good luck,
Steve

 

[supertramp]

Thank you but in Venezuela in this moment its impossible found this belts.
I m underway ( los Roques ) and when i come back i am will call Napa.
Regards - Norbert

 

[supertramp]

To crack a problem:
my intercooler was damaged and the air compressor was stiff.After repair the comressor the belts are working good.
Norbert