Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-21-2013, 02:44 PM   #1
Senior Member
 
marinetrader's Avatar
 
Join Date: Oct 2007
Posts: 301
Fuel Tank Leak

I have developed a pin-hole leak in my port tank. These black in tanks have lasted well over 25 years however. Unfortunately the leak is on the bottom where I cannot get to it.

Any suggestions on a simple repair.
marinetrader is offline   Reply With Quote
Old 09-21-2013, 04:05 PM   #2
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
Unfortunately the leak is on the bottom where I cannot get to it.

Lots of solutions if you can get to it .

If you cant replacement or installing a bladder is about it.
FF is offline   Reply With Quote
Old 09-21-2013, 06:35 PM   #3
TF Site Team
 
Larry M's Avatar
 
City: Jacksonville
Join Date: Nov 2008
Posts: 11,680
Quote:
Originally Posted by marinetrader View Post
...Any suggestions on a simple repair.


Google "CS3204-B2". Keith on this forum has used it successfully. I can post a few pictures tomorrow from another leaking tank after it used the sealer.
Larry M is online now   Reply With Quote
Old 09-21-2013, 07:37 PM   #4
Veteran Member
 
Pinball63's Avatar
 
City: Taunton, MA.
Vessel Name: Navy Whale
Vessel Model: 41' MMC Defever Trawler
Join Date: Mar 2011
Posts: 30
Marine tex works great. A friend of mine had a leak on bottom of his tank on his diesel truck. He drained the tank, cleaned the corner where it leaked and then sealed it with marine tex. It's going five years and still does not leak. It's impervious to gas and oil!
Pinball63 is offline   Reply With Quote
Old 09-21-2013, 09:30 PM   #5
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,144
Quote:
Originally Posted by marinetrader View Post
I have developed a pin-hole leak in my port tank. These black in tanks have lasted well over 25 years however. Unfortunately the leak is on the bottom where I cannot get to it.

Any suggestions on a simple repair.
If you have one pinhole...how close are you to the second pinhole?

THAT would be the question that answered my repair direction.
psneeld is online now   Reply With Quote
Old 09-21-2013, 09:34 PM   #6
Guru
 
fryedaze's Avatar
 
City: Solomons Island Md
Vessel Name: Fryedaze
Vessel Model: MC 42 (Overseas Co) Monk 42
Join Date: Sep 2011
Posts: 1,721
I cant help here but this is my biggest worry with my 1989 tanks. I plan to run my tanks low, pump one over and then go in to see what I can with a boroscope camera this winter. The next step is to install manways.
__________________
Dave Frye
Fryedaze, MC 42 (Monk 42') 1989 Overseas Co
https://mvfryedaze.blogspot.com/
fryedaze is offline   Reply With Quote
Old 09-22-2013, 03:02 AM   #7
Moderator Emeritus
 
Bay Pelican's Avatar
 
City: Chicago, IL
Vessel Name: Bay Pelican
Vessel Model: Krogen 42
Join Date: Oct 2007
Posts: 2,993
Having replaced the tanks on my 1985 Krogen last year I admit it is neither fun nor cheap. However the question of repair or replace gets even more complicated when you consider the eventual resale of your boat. Even if the repair is successful and lasts for your use of the boat, prospective buyers are going to ask about the tanks. In this market buyers have a choice in boats and may discount their offering price on your boat by more than the cost of the replacement. This is the old real estate situation of the guy who puts up with a leaky roof for years, patching the roof, repairing the inside damage and then when he sells the house having to pay for or install a new roof.

As to the issue of the second pinhole developing when I replaced my tanks it was the starboard tank that was leaking (slightly). We cut it out and could see the rust. When we went to cut out the port tank we started to remove the framing and all of a sudden the port tank split along a non-visible rust line and dumped the water in the tank into the bilge. Obviously the rust had affected both tanks.

Good luck with your decision.

Marty
Bay Pelican is offline   Reply With Quote
Old 09-22-2013, 07:29 AM   #8
TF Site Team
 
Larry M's Avatar
 
City: Jacksonville
Join Date: Nov 2008
Posts: 11,680
From what I understand, the Flamemaster CS3204-B2 is the consistency of warm peanut butter. These pictures were taken from the inside of a black iron 350 gallon diesel tank. They found the leaks/pin holes on the inside at the low spot of the tank at the seam. After cleaning, a layer of cloth tape was epoxied at the seam and then coated with the CS3204-B2. I have heard the stuff has been used to repair a bullet damaged fuel tank and also used to coat new tanks.
Attached Images
  
Larry M is online now   Reply With Quote
Old 09-22-2013, 11:36 AM   #9
Guru
 
City: Carefree, Arizona
Vessel Name: sunchaser V
Vessel Model: DeFever 48 (sold)
Join Date: Apr 2008
Posts: 10,185
Quote:
Originally Posted by psneeld View Post
If you have one pinhole...how close are you to the second pinhole?

THAT would be the question that answered my repair direction.
X2. If your tanks are shot forget about the manways.
sunchaser is offline   Reply With Quote
Old 09-22-2013, 11:52 AM   #10
Guru
 
Codger2's Avatar
 
City: San Diego
Vessel Name: Circuit Breaker
Vessel Model: 2021..22' Duffy Cuddy cabin
Join Date: Oct 2007
Posts: 6,691
Quote:
Originally Posted by sunchaser View Post
X2. If your tanks are shot forget about the manways.
Ditto
__________________
Done with diesel power boats! Have fallen in love with all electric!
Codger2 is offline   Reply With Quote
Old 09-22-2013, 03:20 PM   #11
Senior Member
 
marinetrader's Avatar
 
Join Date: Oct 2007
Posts: 301
Thanks for every ones thoughts.
The leak is in an area that is totally inaccessible to get to.
So I have resolved myself to using a few diapers for the short term and replace the tanks; if there is one hole...likely another soon. And the STB tank......probable going to leak too.
So that being said....to get to the tanks from the inside will require moving both the engine and genset...ouch!
So am thinking we cut the hull on the exterior, replace the tank and repair the glass.
As anyone done this or know of any details?
marinetrader is offline   Reply With Quote
Old 09-22-2013, 03:36 PM   #12
Moderator Emeritus
 
Bay Pelican's Avatar
 
City: Chicago, IL
Vessel Name: Bay Pelican
Vessel Model: Krogen 42
Join Date: Oct 2007
Posts: 2,993
You are indicating the current tanks are too big to remove and replace without moving both the engine and the genset. This is true on many trawlers but on some you can cut out the existing tanks in pieces and then replace the two tanks with four smaller tanks. I did this with a Krogen 42 and elected to go with smaller tankage (700 US gallons to 450 US gallons) as I am not crossing any oceans.

We were able to keep the main engine in place.

Marty
Bay Pelican is offline   Reply With Quote
Old 09-22-2013, 04:17 PM   #13
Senior Member
 
marinetrader's Avatar
 
Join Date: Oct 2007
Posts: 301
Marty...though about that....my engine room is tight......but will look at that too.....thanks for suggestion
marinetrader is offline   Reply With Quote
Old 09-23-2013, 07:35 PM   #14
Guru
 
Keith's Avatar
 
Vessel Name: Anastasia III
Vessel Model: Krogen 42
Join Date: Oct 2007
Posts: 2,716
I had my starboard tank repaired with aircraft fuel tank sealer maybe 8-9 years ago. I figured if it's good enough for the FAA, then it's good enough for my trawler. Opened the existing inspection port, then installed new ones in each baffled area. Cleaned out the old gook, solvent washed then sanded and applied the coating. It's fuel resistant and flexible. A good alternative to replacing tanks.
Keith is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 06:44 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012