Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-31-2017, 12:09 PM   #1
Guru
 
Max Simmons's Avatar
 
City: Everett, WA
Vessel Model: Ocean Alexander 38'
Join Date: Oct 2007
Posts: 608
Genset Hoses

My 8kw Onan was leaking on the raw water side and after removing the sound shield, found the hoses running to and from the heat exchanger were in bad shape. Pulled hoses and heat exchanger, which was actually pretty clean. Need to replace hoses, total of 5, that are short and have 90deg bends. Anyone have a good source for these in Seattle area?
Thanks
__________________
Advertisement

Max Simmons is offline   Reply With Quote
Old 05-31-2017, 01:06 PM   #2
Guru
 
Capt.Bill11's Avatar
 
City: Sarasota/Ft. Lauderdale
Country: USA
Join Date: Apr 2014
Posts: 5,436
Quote:
Originally Posted by Max Simmons View Post
My 8kw Onan was leaking on the raw water side and after removing the sound shield, found the hoses running to and from the heat exchanger were in bad shape. Pulled hoses and heat exchanger, which was actually pretty clean. Need to replace hoses, total of 5, that are short and have 90deg bends. Anyone have a good source for these in Seattle area?
Thanks
Your local Oman dealer?

Of course if the hoses are not molded to a specific shape NAPA is a good source.
__________________

Capt.Bill11 is offline   Reply With Quote
Old 05-31-2017, 02:21 PM   #3
Guru
 
twistedtree's Avatar
 
City: Gloucester, MA
Country: USA
Join Date: Jan 2013
Posts: 4,901
Hatton Marne should be able to help you. But you should sort out which hoses are molded for the specific gen set, versus those hat are just regular Trident or Shields wet exhaust hose. It could be any combination, even inside the genset enclosure.
__________________
www.MVTanglewood.com
twistedtree is offline   Reply With Quote
Old 06-01-2017, 01:56 PM   #4
Guru
 
Lepke's Avatar
 
City: Between Oregon and Alaska
Country: US
Vessel Name: Charlie Harper
Vessel Model: Wheeler Shipyard 83'
Join Date: Jun 2016
Posts: 1,567
If you do an ebay search "marine engine water hoses", various sizes are available. Some by the foot. Probably much cheaper than the typical marine store.
Lepke is offline   Reply With Quote
Old 06-01-2017, 02:56 PM   #5
Guru
 
Ski in NC's Avatar
 
City: Wilmington, NC
Country: USA
Vessel Name: Louisa
Vessel Model: Custom Built 38
Join Date: Jan 2014
Posts: 5,327
Those should be still available from Onan/Cummins. If you want to go cheap, take the molded hoses to an autoparts store and find ones that have the right bends and diameter, then trim to fit. Lots of car hoses have multiple bends, you could get lucky and get two or three gennie hoses out of one molded car hose with lots of bends.
Ski in NC is online now   Reply With Quote
Old 06-01-2017, 03:18 PM   #6
Guru
 
Alaskan Sea-Duction's Avatar
 
City: Inside Passage Summer/Columbia River Winter
Country: USA
Vessel Name: Alaskan Sea-Duction
Vessel Model: 1988 M/Y Camargue YachtFisher
Join Date: Jul 2012
Posts: 4,746
As stated Cummins NW if you need them now or you can try here if you have the part numbers. Be advised it may take 10 days or so to get your parts, but cheaper than Cummins.


https://www.jackssmallengines.com/
__________________

Alaskan Sea-Duction is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 08:03 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012
×