Looking at remote oil filter for that genset as well seeing as that is a pain to access as well
$37 delivered
https://m.ebay.com.au/itm/2Pcs-Oil-...m=311869098789&_trksid=p2056116.c100890.m2460
After today's debacle I can not in any way recommend these.
It weeped from day 1 between the engine and the fitting
Cranked it some more and still leaked but only minor so lived with it for a while.
Changed oil and filter so try and fix leak, removal saw deformed oring.
Replaced orings and used rtv silicon as well, still leaked.
Made full face paper gasket, must have been too thin, still leaked and worse than before.
Last ditch effort i made a rubber gasket 10mm wide to get full contact on faces, glued to adapter plate with rtv silicone.
Let it set up overnight, checked around edges to ensure gasket hadn't squeezed out of position.
Turned key this morning and shot full load of oil onto the floor.
Major inconvenience and many hours in cleaning and adapting vs 10 minutes cursing and swearing once a year changing hard to get at filter?
No contest