Cummins 330 hp Air Filter Assembly

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Pgitug

Guru
Joined
Jan 4, 2015
Messages
1,231
Location
Usa
Vessel Name
Escapade
Vessel Make
Nordic Tug 37 2002
I can not seem to keep my air filter assembly clamped on to the turbo intake. Even as I am tightening the bolt clamp the connector sleeve seems to be "Walking" it's self off.
Then after a few hours of running the boat the air filter assembly is hanging loose again.
Anyone else experience this problem.
 
Do you have a Walker AirSep? We do on our 6bta and I have experienced the same. Our "solution" was to use the Walker sealing compound between the filter and the sleeve, two T type hose clamps and not to over tighten. If you over tighten you can collapse a section of the sleeve (I did). Still, you have to be careful not to hit the filter arrangement as you move around it. As I recall, that sleeve is slightly tapered, which may aid in getting the assembly onto the sleeve but makes it so it has a tendency to work itself off.
 
Thanks for the info. It looks like a Walker unit.
I will call them as well and confirm the fix.
Appreciate your help.
It has been driving me nuts.
 
Back
Top Bottom