We have Lehman 120s and need to flush fresh water system to change antifreeze. Problem is I am not positive where the drains are located on the motor. Manual is not very specific. If you have done this, can you advise the best way to purge the old antifreeze and where the drain valves are located?
Closed water flush
- Thread starter trader76
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
RT Firefly
Enigma
Greetings,
Mr./Ms. 76. Welcome aboard. Oh golly, drains...To the best of my poor memory the drain on the starboard motor is inboard between the forward end of the starter motor and the oil pressure switch right on the block. Should be staring you in the face. Can't remember if the port engine is the same (on the starter motor side) or if the drain is mirrored inboard.
You'll have to drain the heat exchanger and I think the exhaust manifold as well (not sure about the exhaust manifold).
Mr./Ms. 76. Welcome aboard. Oh golly, drains...To the best of my poor memory the drain on the starboard motor is inboard between the forward end of the starter motor and the oil pressure switch right on the block. Should be staring you in the face. Can't remember if the port engine is the same (on the starter motor side) or if the drain is mirrored inboard.
You'll have to drain the heat exchanger and I think the exhaust manifold as well (not sure about the exhaust manifold).
Last edited:
