Reply
 
Thread Tools Display Modes
 
Old 04-22-2011, 02:52 PM   #1
Member
 
Join Date: Jul 2010
Posts: 7
Adjusting Morse dual SR controls

I have twin transmission controls, from 2 stations.* Each station works fine no cable binding or resistance when disconnected.* But put upper and lower station together the upper station locks.* The controlls were loose inside and I tightened them up and rebuilt them.* They were thight before the rebuild, now they won't work together.

Any suggestions were to begin?

Thanks,

Carl*
__________________
Advertisement

cody707 is offline   Reply With Quote
Old 04-23-2011, 08:52 AM   #2
Guru
 
JohnP's Avatar
 
City: Toms River
Country: USA
Vessel Name: D U E T T E
Vessel Model: 1996 36' Island Gypsy
Join Date: Dec 2009
Posts: 1,109
RE: Adjusting Morse dual SR controls

Hate to say it but I think the facts point to something you may have done when you "rebuilt" them.

Is it possible a part could have been installed backwords and the controls are somehow working against one another.

Just a thought.* JohnP
__________________

JohnP is offline   Reply With Quote
Old 04-23-2011, 05:10 PM   #3
Member
 
Join Date: Jul 2010
Posts: 7
RE: Adjusting Morse dual SR controls

Thanks,

But when the upper and lower are hooked sepratly to the transmissions they work flawlessly.

When both are connected, ( upper to lower ), they lock and neither will move!

Thanks,
cody707 is offline   Reply With Quote
Old 05-02-2011, 10:05 AM   #4
Guru
 
Sailor of Fortune's Avatar
 
City: Saint Augustine, Fl.
Country: Port of St Augustine ,FL
Join Date: Sep 2009
Posts: 1,941
RE: Adjusting Morse dual SR controls

If I'm not mistaken, they connect through a "DS" plate (Morse ). If this is the set up you have, I would look at this plate where both stations come in and 1 cable goes to the gear box.
Sailor of Fortune is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lehman SP135 Adjusting engine valves Forkliftt Power Systems 33 04-25-2017 04:35 PM
Electronic Throttle Controls jlamb15 Power Systems 46 10-08-2014 08:45 AM
Morse Cable Steering on Bristol 42 PaytoPlay Other Trawler Systems 6 05-22-2012 07:00 AM
Morse Cables Steve General Discussion 13 01-21-2012 03:17 AM
Dual station controls Jon Power Systems 3 04-15-2008 10:27 AM




All times are GMT -5. The time now is 02:20 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012