GMB
Veteran Member
- Joined
- Dec 30, 2012
- Messages
- 41
- Location
- US
- Vessel Name
- Joy Shared
- Vessel Make
- Gulfstar 44 Motor Cruiser
Does anyone have information on the internal configuration of the hull-to-deck joint on a GS44MC or similar models?
There is an approximately 1 1/2" raised rim upon which the wood sits. I assume the wood covers fasteners that go through the rim and through an in-turned flange on the hull.
Do I have the fasteners right?
How thick is the part of the deck that forms a lap joint with the in-turned flange?
How thick is the in-turned flange of the hull?
Hoping someone has intimate knowledge of this structural detail. I don't have ready access to the boat myself.
There is an approximately 1 1/2" raised rim upon which the wood sits. I assume the wood covers fasteners that go through the rim and through an in-turned flange on the hull.
Do I have the fasteners right?
How thick is the part of the deck that forms a lap joint with the in-turned flange?
How thick is the in-turned flange of the hull?
Hoping someone has intimate knowledge of this structural detail. I don't have ready access to the boat myself.