Reply
 
Thread Tools Display Modes
 
Old 05-09-2015, 08:05 AM   #1
Member
 
City: Mt Pearl
Country: Canada
Join Date: May 2015
Posts: 20
MT Tradewinds 43 - Systems

Like most new owners, I am on the vertical learning curve.

If anybody has or have developed schematic/hand drawn diagrams of systems (electrical, septic, fuel etc) and would consider sharing, it would be greatly appreciated.

Thanks in advance!

Zoomie
__________________
Advertisement

zoomie is offline   Reply With Quote
Old 05-26-2015, 12:45 AM   #2
Veteran Member
 
City: SF Bay
Country: United Stated
Join Date: May 2015
Posts: 56
I copied my blueprints from the builder then use clear overlays. Then into a tabbed binder with a notes section for each.

Sounds extreme but once you start overlapping and physically routing redundant systems you will be glad you built a master.

And if you want to check clearances you have scale and can just layer as many as you want to see at once.
__________________

Tuesday is offline   Reply With Quote
Old 05-26-2015, 07:01 AM   #3
Guru
 
timjet's Avatar
 
Join Date: Apr 2009
Posts: 1,905
I used the free windows draw program to diagram my electrical, electronics, and septic systems. The effort to
learn the systems and diagram them has come in very handy.
__________________
Tim
Tampa Bay
Carver 355 ACMY Twin Cummins Diesels Sold
timjet is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 08:51 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012