|
|
02-24-2014, 07:49 PM
|
#1
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
What size anchor line is this ?
Is this 5/8" or 3/4" anchor line .
|
|
|
02-24-2014, 07:53 PM
|
#2
|
Guru
City: Pensacola
Join Date: May 2012
Posts: 748
|
5/8
|
|
|
02-24-2014, 07:54 PM
|
#3
|
Guru
City: South FL
Vessel Name: Oliver
Vessel Model: Nordhavn 47 Hull# 12
Join Date: Apr 2013
Posts: 3,607
|
Quote:
Originally Posted by Pack Mule
Is this 5/8" or 3/4" anchor line .
|
3/4?
__________________
Thanks, Oliver
M/V Oliver
Nordhavn 47 Hull #12
|
|
|
02-24-2014, 07:56 PM
|
#4
|
Master and Commander
City: Vallejo CA
Vessel Name: Carquinez Coot
Vessel Model: penultimate Seahorse Marine Coot hull #6
Join Date: Sep 2010
Posts: 12,559
|
three-fourths (six-eights)
__________________
Kar-KEEN-ez Koot
|
|
|
02-24-2014, 08:54 PM
|
#5
|
Veteran Member
City: Green Cove Springs, FL
Vessel Name: No vessel
Join Date: Jan 2014
Posts: 44
|
It looks to be 3/4.
|
|
|
02-24-2014, 09:00 PM
|
#6
|
Guru
City: Concrete Washington State
Vessel Name: Willy
Vessel Model: Willard Nomad 30'
Join Date: Oct 2007
Posts: 18,743
|
3/4
You can see better than us ..... Why do you ask?
__________________
Eric
North Western Washington State USA
|
|
|
02-24-2014, 10:54 PM
|
#7
|
Guru
City: Sydney
Vessel Name: Sojourn
Vessel Model: Integrity 386
Join Date: Oct 2011
Posts: 13,333
|
Perhaps 22mm.
__________________
BruceK
2005 Integrity 386 "Sojourn"
Sydney Australia
|
|
|
02-24-2014, 11:52 PM
|
#8
|
Guru
City: Miami Florida
Vessel Name: Possum
Vessel Model: Ellis 28
Join Date: Aug 2011
Posts: 5,308
|
If it's a soft lay, it might be 5/8". The way to tell is to weigh as much of it as you can.
and figure out the weight per foot. 5/8" nylon should be about .099 pounds per foot and 3/4" .143 pounds per foot.
|
|
|
02-25-2014, 12:26 AM
|
#9
|
TF Site Team
City: California Delta
Vessel Name: FlyWright
Vessel Model: 1977 Marshall Californian 34 LRC
Join Date: Apr 2008
Posts: 13,728
|
Quote:
Originally Posted by BruceK
Perhaps 22mm.
|
What is that, Bruce, computer code? We have no idea what ypu're talking about. Can you translate to Exclusive USA Units of Measure? (EUSAUM)
Back to the OP's question, looks like a 3/4 US inch to me. But I like HopCar's answer a whole lot better.
Parks, is that wet weight or dry weight? If wet weight, salt water or fresh? What would that weight be in all other parts of the world?
Seriously, I like that 10 ft to a lb for 5/8. Good info!
|
|
|
02-25-2014, 04:01 AM
|
#10
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
Quote:
Originally Posted by manyboats
3/4
You can see better than us ..... Why do you ask?
|
I know that it measures 3/4" but I always thought that line od was always bigger than what it actually is . I've always been con fused on this .I was trying to size a cleat for this line . Would a 9 inch cleat be good for this or would it be too small.I had a small bolt down sampson post before and it didn't matter what the size was .
|
|
|
02-25-2014, 05:52 AM
|
#11
|
Guru
Join Date: Oct 2007
Posts: 22,553
|
The question is what cleat does it fit best?
5/8 is 10/16 , which firs a 10 inch cleat
3/4 is 12/16, so needs a 12 inch cleat,
|
|
|
02-25-2014, 06:03 AM
|
#12
|
Moderator Emeritus
City: Cameron, La
Vessel Name: Baobab
Vessel Model: Bayliner 4788
Join Date: Aug 2013
Posts: 2,660
|
FF or another way to say it is ....
Cleats should measure one inch in length (tip to tip) for each 1/16 inch of line diameter.
|
|
|
02-25-2014, 07:02 AM
|
#13
|
Guru
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
|
Quote:
Originally Posted by FF
The question is what cleat does it fit best?
5/8 is 10/16 , which firs a 10 inch cleat
3/4 is 12/16, so needs a 12 inch cleat,
|
It could be 11/16.
Sizing a cleat to fit the line seems backwards to me. Line is temporary, cleats are permanent. Install the cleats then buy line to fit.
As a practical matter smaller line fits a larger cleat better than the other way around so I would install the larger cleat unless I had a good reason not to.
|
|
|
02-25-2014, 07:30 AM
|
#14
|
TF Site Team
City: Jacksonville
Join Date: Nov 2008
Posts: 11,682
|
Cut off a piece, take to a local chandlery and compare with a known size maybe?
|
|
|
02-25-2014, 07:36 AM
|
#15
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
I've got about 1000' of this line . I have about 500' of next size down , but the larger line came with the boat and is almost new. Looks like I need a 12" cleat for this line. FF I guess I'll have to pass on the 9" cleat since I was going to use it for my anchor cleat . I'm still want the two 12" you have for my bow cleats. I wish you had one more.
|
|
|
02-25-2014, 07:37 AM
|
#16
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
Quote:
Originally Posted by Pack Mule
I know that it measures 3/4" but I always thought that line od was always bigger than what it actually is . I've always been con fused on this .I was trying to size a cleat for this line . Would a 9 inch cleat be good for this or would it be too small.I had a small bolt down sampson post before and it didn't matter what the size was .
|
Maybe my thinking on this only applies to braided line and not twisted ?
|
|
|
02-25-2014, 08:22 AM
|
#17
|
Technical Guru
City: Wilmington, NC
Vessel Name: Louisa
Vessel Model: Custom Built 38
Join Date: Jan 2014
Posts: 6,194
|
Get the biggest cleat you can that fits/looks ok/you can afford. If you ever have to storm tie the boat, it is easy to run out of cleat when adding lines.
|
|
|
02-25-2014, 08:47 AM
|
#18
|
Senior Member
City: Florida USA and Ontario Canada
Vessel Name: anytime
Vessel Model: 2007 Chaparral 270 Signature LOA 29'
Join Date: Jan 2014
Posts: 301
|
Quote:
Originally Posted by Ski in NC
Get the biggest cleat you can that fits/looks ok/you can afford. If you ever have to storm tie the boat, it is easy to run out of cleat when adding lines.
|
+1 ...
__________________
Best ... Richard
|
|
|
02-25-2014, 11:07 AM
|
#19
|
Guru
City: Concrete Washington State
Vessel Name: Willy
Vessel Model: Willard Nomad 30'
Join Date: Oct 2007
Posts: 18,743
|
Pack Mule,
Three strand could require a bigger cleat than braid or Brait due to it's flexibility. Standards like FF quoted often aren't applicable. I'd say as long as you can tie off securely the way YOU do it and w the ties or knots YOU use and it's strong enough I'd say go for it.
Also the rule of thumb dosn't take into consideration the design of the cleat. My three fwd cleats have less room for line as they are double posted. Most galvanized cleats are single posted and have more room for line. Put your own judgement into the picture as well as common practice.
Anchors are sized to the length of a boat but the standards assume a typical boat. Chapman may call out for a certain length of anchor rode but FL and AK have way different requirements.
Can't remember the lengths of my cleats but I use 5/8ths line and they are fine. I think the're 12" and 10". In this pic I have braid, Brait and 3 strand nylon line. The flexibility and weave of the Brait can be easily seen. The port bow line is only 1/2". For reference the chain in the box is 1/4" and the chain on the deck is 3/8ths". Oh ... the cleats and capstan are through bolted.
__________________
Eric
North Western Washington State USA
|
|
|
02-25-2014, 06:00 PM
|
#20
|
Guru
City: Thibodaux, Louisiana
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,882
|
This rope looks to measure 3/4" but is sold as 5/8" I don't know the reason, maybe rope is sized while tightly wound or twisted? In the picture it is lying "natural" but not untwisted. It is nylon rope "Hecho en Mexico" I believe it was $185.00 for a 600 foot spool when I bought it in Houma La. 5 years ago.
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|