|
|
05-19-2015, 06:28 PM
|
#1
|
Guru
City: Houma, Louisiana
Vessel Name: M/V LUNASEA
Vessel Model: 45ft Bluewater Coastal
Join Date: Aug 2014
Posts: 529
|
Mooring Snubber
Is snubbers needed when at anchor. What does it really do?
|
|
|
05-19-2015, 06:35 PM
|
#2
|
Guru
City: Tri Cities, WA
Join Date: Nov 2012
Posts: 4,406
|
Kartracer, snubbers, when installed properly and used properly take up some of the shock that a boat would normally receive when riding at anchor in a wind or from waves.
With the line wrapped around it and kept snug, when there is a wave (or wind) that would jerk the boat, the snubber absorbs some of the shock.
Yes, they do work.
__________________
Mike and Tina
1981 Boston Whaler 13'
|
|
|
05-19-2015, 06:46 PM
|
#3
|
Scraping Paint
City: -
Join Date: Oct 2007
Posts: 13,745
|
Snubbers are only needed with all-chain rode. A combination rode (nylon line with a short length of chain connecting the end of the nylon to the anchor) it it's own snubber (shock absorber). No separate shock absorbing device like a snubber is needed.
|
|
|
05-19-2015, 06:50 PM
|
#4
|
Guru
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,119
|
Quote:
Originally Posted by kartracer
Is snubbers needed when at anchor. What does it really do?
|
Depends...if you are using mostly a nylon rode...probably not.
If using chain and expecting enough wind that the chain may straighten, definitely.
Most all chain rode users usually use a snubber.
A lot of ifs....so keep reading up on anchoring and you will get the idea.
Lots of people may tell you their way of doing it...but it isn't necessarily correct or the appropriate for any given situation or something that works for you.
Knowledge and practice will make your anchoring safe and a bit more relaxing.
|
|
|
05-19-2015, 07:03 PM
|
#5
|
Guru
City: Sydney
Vessel Name: Sojourn
Vessel Model: Integrity 386
Join Date: Oct 2011
Posts: 13,293
|
An important reason for a snubber is to take the load off the windlass which is not intended to take heavy sharp loading. Internal damage, like expensive stripping and fracturing of gears, can result. The snubber line moves the load to another part of the boat, such as a sampson post or a mooring cleat.
While essential with an all chain rode, or when only using the chain section of a combination rode, I`m less sure about the position where a rope rode is in use, it may also be desirable to move that load off the windlass to a cleat or post.
__________________
BruceK
2005 Integrity 386 "Sojourn"
Sydney Australia
|
|
|
05-19-2015, 07:06 PM
|
#6
|
Scraping Paint
City: -
Join Date: Oct 2007
Posts: 13,745
|
Quote:
Originally Posted by BruceK
I`m less sure about the position where a rope rode is in use, it may also be desirable to move that load off the windlass to a cleat or post.
|
It's a good idea to do this, but you don't need a snubber to do it. You can simply secure the rode itself to a solidly backed deck cleat or Sampson post.
|
|
|
05-19-2015, 07:17 PM
|
#7
|
Master and Commander
City: Vallejo CA
Vessel Name: Carquinez Coot
Vessel Model: penultimate Seahorse Marine Coot hull #6
Join Date: Sep 2010
Posts: 12,559
|
Post #3.
Retrieving snubber attached to an anchor chain:
Use a nylon line when tied to a mooring (here fore and aft); no snubber needed:
__________________
Kar-KEEN-ez Koot
|
|
|
05-19-2015, 11:02 PM
|
#8
|
Guru
City: Tri Cities, WA
Join Date: Nov 2012
Posts: 4,406
|
I'm glad you guys responded. I was only thinking of a rubber snubber that would be used in an all-rope rode.
Thanks for setting the record straight.
__________________
Mike and Tina
1981 Boston Whaler 13'
|
|
|
05-19-2015, 11:22 PM
|
#9
|
Guru
City: Houma, Louisiana
Vessel Name: M/V LUNASEA
Vessel Model: 45ft Bluewater Coastal
Join Date: Aug 2014
Posts: 529
|
Quote:
Originally Posted by GFC
I'm glad you guys responded. I was only thinking of a rubber snubber that would be used in an all-rope rode.
Thanks for setting the record straight.
|
So was I !!!
|
|
|
05-19-2015, 11:36 PM
|
#10
|
Guru
City: Sydney
Vessel Name: Sojourn
Vessel Model: Integrity 386
Join Date: Oct 2011
Posts: 13,293
|
Quote:
Originally Posted by kartracer
So was I !!!
|
Between us, we found most of the merits of snubbers.
The snubber line I made up, using a bear claw for chain attachment, has one of those rubber block thingies you weave the line through, doubt it helps much if at all.
__________________
BruceK
2005 Integrity 386 "Sojourn"
Sydney Australia
|
|
|
05-21-2015, 04:57 AM
|
#11
|
Guru
Join Date: Oct 2007
Posts: 22,553
|
The simplest and most functional snuber rig is to attach 2 nylon lines to a low mounted bow eye with a proper backing plate.
The chain as always goes to a deck fitting a chain stopper, so the windlass has zero load.
The both lines have no metal at either end just whipped and tied on..
They are short enough not to engage the propeller if they go overboard.
The thinnest is simply tied with a bowline to a chain link as the chain is going overboard.
Should the wind get to the point the thin line goes taught and the chain jerks the boat hard , the thicker line with more chain is used .
The thin line (1/4 or 3/8) will simply snap, no big deal as it happens so rarely.
|
|
|
09-16-2015, 07:38 PM
|
#12
|
Guru
City: Sidney
Join Date: Feb 2015
Posts: 2,258
|
Quote:
Originally Posted by psneeld
Depends...if you are using mostly a nylon rode...probably not.
If using chain and expecting enough wind that the chain may straighten, definitely.
|
Is there a boat size/weight where you would no longer use a combination chain, rope rode?
|
|
|
09-16-2015, 08:41 PM
|
#13
|
Guru
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
|
1/4" line as a snubber!?
One of the big, if not biggest, advantages of using a snubber line on a chain rode is its shock absorbing effect. The snatching forces that happen once a chain comes tight and the full load is put upon the anchor is one of the key reasons anchors break loose. So once the line breaks you no longer have the important shock absorbing effect of the line.
|
|
|
09-16-2015, 08:51 PM
|
#14
|
Guru
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
|
Quote:
Originally Posted by Hawgwash
Is there a boat size/weight where you would no longer use a combination chain, rope rode?
|
Anchor size and weight probably has as much or more to do with that than the size of the boat alone. Once you reach the larger size and weight anchors it's not really practical to have a combination line and change rode.
|
|
|
09-16-2015, 09:30 PM
|
#15
|
Senior Member
City: Merced CA
Vessel Name: none
Vessel Model: pipe dream
Join Date: Jul 2014
Posts: 189
|
Quote:
Originally Posted by Marin
Snubbers are only needed with all-chain rode. A combination rode (nylon line with a short length of chain connecting the end of the nylon to the anchor) it it's own snubber (shock absorber). No separate shock absorbing device like a snubber is needed.
|
Marin, the question got me thinking that this really is a question that could be worthy of some serious investigation--the answer to which might be valuable to the entire boating community. True that the nylon line stretches x% and acts as a snubber. But the weight of the all chain rode also "snubs" the forces as it is straightened against gravity (is this the catenary effect?). I certainly don't have the time (and perhaps not the brain power) to figure it out, but perhaps you or one of your engineering contacts at Boeing could do the math for this hypothetical:
depth= 45 feet
7:1 scope (315 feet)
two scenarios: A=all chain 3/8" B= 25' 3/8" chain and 290' of 3-strand nylon rode (please specify typical diameter).
The question is, which arrangement, A or B, would take more force acting upon the boat to reach the full extension point of the anchoring system, and therefore benefit more from a snubber?
In other words, does it take more force to bring the weight of the chain to full extension or does it take more force to lift the short length of chain and then stretch the nylon rode to the x% (20% or?) of its limit? I have absolutely no idea what the answer is, but it would be great to have an analysis. Appreciate any help you or other TF members can provide...
I've probably not included some necessary facts to solve the equation (need weight per foot of both chain and line, etc)--can other TFers provide that?
__________________
Dawdler
|
|
|
09-16-2015, 09:37 PM
|
#16
|
TF Site Team
City: California Delta
Vessel Name: FlyWright
Vessel Model: 1977 Marshall Californian 34 LRC
Join Date: Apr 2008
Posts: 13,728
|
Many with a combo rode only let out enough rode to only need the chain, so in effect, it acts as a chain-only rode. In those cases, combo rode owners are well served to use a snubber for shock absorption and noise reduction.
With 120 ft of chain then 240 ft of line rode, I often anchor in 15 ft of water with 80-100 ft of rode. I use a snubber in anything worse than benign conditions or if I'm spending the night.
|
|
|
09-16-2015, 10:22 PM
|
#17
|
Guru
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
|
Tests along those lines have been done. And they have shown that snatch loads are the most significant cause of anchors braking loose. As well as showing that a combination line and chain rode makes for the best rode as far as dealing with snatch loads goes.
I've got a book that talks about this at home but not with me. I don't recall its title off hand. As I recall the author is French. Perhaps someone else knows what book I'm talking about.
|
|
|
09-16-2015, 10:26 PM
|
#18
|
Senior Member
City: Merced CA
Vessel Name: none
Vessel Model: pipe dream
Join Date: Jul 2014
Posts: 189
|
Thanks Capt Bill. After I posed the question I was curious and did a little on-line research--agrees with what you said. facts seem to support idea that weight of chain (catenary effect) doesn't help nearly as much as scope and absorbing the "snatch loads." Thanks for response.
__________________
Dawdler
|
|
|
09-16-2015, 10:30 PM
|
#19
|
Guru
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
|
I think the title is "The Complete Book of Anchoring".
|
|
|
09-16-2015, 10:36 PM
|
#20
|
Senior Member
City: Merced CA
Vessel Name: none
Vessel Model: pipe dream
Join Date: Jul 2014
Posts: 189
|
sounds like that could lead to a serious hijacking of the snubber question and get us all back into anchoring!
Let's let sleeping dogs lie....
Best to you, Capt Bill
curtis
__________________
Dawdler
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|